Analog-way Pulse Manuel d'utilisateur télécharger pdf (Page 54)

If you need to use your own Software Control program from a PC

or automation, the device allows communication through an ASCII

code protocol. All commands can be found on www.analogway.com,

in the [Technical Support] menu, [User’s Manuals] menu.

All Analog Way products equipped with an RS232 input are

compatible with Crestron, AMX, Medialon, and most major control

systems. TCP/IP control ports are also available on most Analog

Way products, as standard or as options.

To control a PLS300 product with an External Remote Controller (PC

Software Control - Touch Pad Controller…) follow the indications

below :

1/ In the “Control” - “LAN Setup” menu, congure the connection of

the PLS300 product in UDP mode and setup the Local and Remote

Addresses as well as the Local and Remote Ports in concordance

with your Network.

2/ Congure the TCP/IP address of your External Remote Controller.

In example: 192.168.000.001

3/ Setup the UDP connection of your External Remote Controller in

concordance with your Network.

4/ You can now control your PLS300 product with an External

Remote Controller.

7-3. EXTERNAL PROGRAMMING

1 2 ... 49 50 51 52 53 54 55 56 57 58

Pas de commentaire

Analog-way Pulse Manuel d'utilisateur Page 54