Analog-way AW SCREEN FRAME CUTTER - Ref. AWSFC Manuel d'utilisateur télécharger pdf (Page 3)

Whether you have selected the 1:1 or the Custom opon, you can also adjust the image posion inside the

desnaon screen: Select the Center opon if the image needs to appear centered, or select the Custom

opon to adjust the posion precisely inside the screen. Click the Refresh buon to update the preview.

4. Congure the overlapping areas (covering)

To create a seamless blend between two or more projected images, the projectors must be overlapped

(usually by 15%–25%). This means the background pictures must also include accurate overlapping areas.

To adjust each overlap area, select the corresponding item in the Covering panel horizontal or vercal drop-

down list control then set the covering to the desired value. If you want to harmonize all vercal or horizontal

areas, make sure to check the box in front of the corresponding drop-down list control.

Click the Refresh buon to update the preview.

5. Create and save the image(s) for your blend

Set the quality level you want to use when exporng images (100% being the highest quality, 50% the lowest).

Click the Save image(s) as PNG buon and select the desnaon folder to export the background images

(output format is PNG). The default naming convenon for exported images is originalname_x_y.png (where

x is horizontal index and y is the vercal index). If you would prefer to use another prex for these les, simply

enter your text in the eld Output lename prex before pressing the Save image(s) as PNG buon.

6. Save the current conguraon

Choose Save conguraon from the File menu to save the current sengs to conguraon le (.dat).

7. load a saved conguraon

Choose Load conguraon from the File menu to load sengs from a conguraon le (.dat).

RUNNING AW SCREEN FRAME CUTTER

1 2 3 4

Pas de commentaire

Analog-way AW SCREEN FRAME CUTTER - Ref. AWSFC Manuel d'utilisateur Page 3