Analog-way Octo Vue - OVP831 Manuel d'utilisateur télécharger pdf (Page 17)

OCTO VUE / QUATTRO VUE Chapter 2 : STARTING (continued)

PAGE 17

2-4. INPUTS #2 to 8 DESCRIPTION

 CONNECTION:

You can connect to these inputs one of the following source:

• A composite video source.

NOTE

: The input #7 (#4 on the QVP421) can accept a composite video source on its BNC connector. The input #8

can accept a composite video source on its RCA connector.

• A S.VIDEO source.

NOTE

: The input #7 (#4 on the QVP421) can accept a S.VIDEO source on its BNC connectors. The input #8 can

accept a S.VIDEO source on its 4-pin mini DIN.

• A Component video source.

• A HD-YUV source.

• A RGBS video source.

• An analog computer source (RGBHV, RGsB, RGBS).

 HD15 PIN ASSIGNMENT:

SIGNAL COMPUTER (analog) VIDEO RGB/S YUV & HD-YUV S.VIDEO (Y/C) COMPOSITE VIDEO

PIN 1 RED. RED. Cr / Pr. C (chrominance).

PIN 2 GREEN. GREEN. Y. Y (luminance). VIDEO (NTSC, PAL...)

PIN 3 BLUE. BLUE. Cb / Pb.

PIN 6 RED return. RED return. Cr / Pr return. C return.

PIN 7 GREEN return. GREEN return. Y return. Y return. Return.

PIN 8 BLUE return. BLUE return. Cb / Pb return.

PIN 10 GND. GND.

PIN 13 H sync or C sync (S). C sync (S).

PIN 14 V sync.

HD15 female connector of the device.

 AUDIO SOURCE:

-You can connect an unbalanced stereo audio source on a jack 3.5 connector (input #2 & 8).

-You can connect an unbalanced stereo audio source on a MCO connector (input #3 to 6).

-You can connect an unbalanced or balanced stereo audio source on a MCO connector (input #7).

2-5. OUTPUTS DESCRIPTION

 PREVIEW OUTPUT:

You can connect to this output an analog control display device. The preview output format is XGA at 60 Hz.

 MAIN ANALOG OUTPUT:

You can connect to this output an analog display device.

 MAIN DVI OUTPUT:

You can connect to this output an analog* or digital display device.

* OVX831, OVF831 & OVP831.

 DVI-I PIN ASSIGNMENT (OVX831, OVF831, OVP831):

Function

TMDS Data 2-

TMDS Data 1-

TMDS Data 0-

TMDS Data 2+

TMDS Data 1+

TMDS Data 0+

TMDS Data 2 Shield

TMDS Data 1 Shield

TMDS Data 0 Shield

Not used.

DDC Clock

+ 5V (Power)

TMDS Clock Shield

DDC Data

Ground for (+5V)

TMDS Clock+

Analog Vertical Sync.

Hot plug detect.

TMDS Clock-

Analog Red video (or Cr / Pr or C)

Analog Green Video (or Y or composite video)

Analog Bleu Video (or Cb / Pb)

Analog Horizontal Sync (or composite sync)

Analog Common Ground Return

DDC = Display Data Channel.

TMDS = Transition Minimized Differential Signal.

C1 C2

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 97 98

Commentaires sur ces manuels

Pas de commentaire

Analog-way Octo Vue - OVP831 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Analog-way Octo Vue - OVP831