Setting up the Orchestra
User conguration:
On startup, the ORC50 tactile screen will display the
User page. The rst time you use the ORC50, you
will have to create a new user.
1/ Press the New User button on the tactile screen
2/ Name the new user as required and press the
[OK] button to validate your choice. Press [OK] to
skip password creation.
3/ On the User page, choose the user you just
created, and press the [OK] button. The ORC50 will
display its default menu screen.
System conguration:
The ORC50 System Conguration page lets you
adjust properties like the IP address of the ORC50.
1/ Press System on the tactile screen. The
Network Conguration tab will be displayed.
2/ Select the Lan Settings option, rotate the
corresponding knobs to change the IP address
of the ORC50 (IP1,2,3,4) or press the <Default>
button to restore the address to 192.168.0.9.
Press the [OK] button to validate
3/ Press [OK] again to Exit the system page.
Show conguration:
When starting with the ORC50, you will need to
create a new show.
1/ Press the Shows button on the tactile
screen then “Create a New Show” button.
2/ The ORC50 will display the Show Edit
Name screen, you can now enter a new name.
Choose a name for your show, then press the
[OK] button to validate your choice.
3/ The ORC50 will display a blank show page.
Conguring the show
Screen setup:
1/ Select a Screen in the Screen section of the ORC50
by pressing one of the six available buttons. The
Screen page will appear on the ORC50 tactile screen.
2/ Press Screen Setup on the tactile screen.
3/ On the <Screen Setup>, select the slave device
type and mode. Press Edit to rename your screen.
4/ Press Edit Devices. Add Device. Using the
tactile screen, Congure the communication
settings of the device that the ORC50 will control.
5/ Press the [OK] button to validate your
changes. The ORC50 will begin connecting to
the congured device.
6/ Press the [OK] button to return to the Screen
Setup page.
Output conguration:
1/ In the Screen Setup page, press Edit
Outputs and select the output, Main or
Preview, you wish to adjust, then congure the
output format (resolution), output rate, output
type required.
2/ Press Pattern, and select an available
pattern to check your output settings on
screen. Press Pattern again, and select None
to revert to your image on screen.
3/ Press the [OK] button to return to the screen
setup page.
Input conguration:
1/ In the Screen Setup page, press Edit Input, you
can manually congure the type of plug, the signal
type or press the [AUTOSETTING] button, for an
automatic setup of your inputs.
2/ Press [OK] button.
Soft Edge setup:
Please refer to the Soft Edge Setup Chapter of
the User manual.
Image settings:
In the screen setup page, to access source
image settings, press the [IMAGE SETTINGS]
button.
Logos & Frames conguration:
1/ In the screen setup page, press the [LOGOS/
FRAMES] button.
2/ Select a source you wish to use as a logo or
frame.
3/ Choose the memory slot to save the Logo/Frame
into, edit size, position with the joystick, and the
keying settings by rotating the approriate knobs.
4/ Press [STORE] to store your logo or frame.
Rear Panel Description
100-250 VAC 2A 50-60Hz
RJ-45 connector: Connect the Orchestra to
10/100 Ethernet LAN using this female RJ-45
connector: used to control switcher
Not in use
Clone of the tactile screen
For installation
Serial port (not in use)
DC
RJ-45
RJ-45 - Auxiliary
Auxiliary display output
Mounting Bar
RS-232
(48 pages)
(29 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels