Analog-way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual Manuel d'utilisateur télécharger pdf (Page 48)

7.3.4 Screens



4 Program outputs

You have the choice to build Hard edge or So edge: horizontally or vercally or both:





Program outputs 1 & 2 and Program outputs 3 & 4







A Screen can also be congured as a Condence monitor clicking on the associated buon. Congure the

condence monitor within the Condence setup area. See secon 7.3.13 Condence management for more

informaon.

The Preset Toggle opon enables a copy of the program on the preview at each Take, resulng in an eecve

“swap” or “ip-op” of program and preview.

If enabled, the Auto Take opon will trigger a Take as soon as an other source is applied to a layer.

If you chose a rotaon for an output, press the enable rotaon buon to engage the rotaon processing. In

order to use the rotaon, you will have to enable the rotaon on the related screen into the screen secon.

If you use one rotated screen, you should enable the rotaon for all the other screens (even if they are not

rotated), so that the latency is the same for all screens.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 117 118

Pas de commentaire

Analog-way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual Manuel d'utilisateur Page 48