Analog-way LIVECORE PLATFORM TPP Current Programmer's Gu Manuel d'utilisateur télécharger pdf (Page 32)

PROGRAMMER'S GUIDE FOR v02.00.46

3.9 Configuring the Monitoring Mosaic mode

3.9.1 Usage

This command sequence sets the Monitoring output to Mosaic mode, sets one source in a Monitoring

window and updates/refreshes the Monitoring output.

3.9.2 Detailed commands sequence

 Start the monitoring configuration change : This command prepares the Monitoring for a new

configuration by writing the value 0.

Syntax : <dev>,0MLupd

<dev> is the device index (0 for Master device, 1 for Slave device).

 Enable monitoring Mosaic mode : This command enables Mosaic mode by writing the value 0.

Syntax : <dev>,0MLfen

<dev> is the device index (0 for Master device, 1 for Slave device).

 Select source for one of the Windows: This command sets the source displayed in a Monitoring

window.

Syntax : <dev>,<elt>,<src>MLces

<dev> is the device index (0 for Master device, 1 for Slave device)

<elt> is the Monitoring Mosaic window index (0 to 7 or 0 to 11 depending on your configuration)

<src> is the element source index (for possible values, see chapter 3.7)

 Apply changes: This command updates the Monitoring.

Syntax : <dev>,1MLupd

<dev> is the device index (0 for Master device, 1 for Slave device).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Pas de commentaire

Analog-way LIVECORE PLATFORM TPP Current Programmer's Gu Manuel d'utilisateur Page 32